How do BRUTALISM V.1, V.3 and Thorn differ?

V.1 has a dense row of flat bars and a light Living Silver finish. V.3 has stepped bars and black oxidation. Thorn has an asymmetric half-link silhouette. In size 18, either BRUTALISM ring weighs 14 g; Thorn weighs 7 g.

What sizes and weights are available?

BRUTALISM V.1 and V.3 come in sizes 15–22 and weigh 9.6–24 g. Thorn comes in sizes 16–22 and weighs 4.7–12.7 g. These are catalogue weights for the corresponding sizes. The size number is the inner diameter in millimetres.

Does every STRUGA signet arrive black?

No. V.3 is blackened at the bench. V.1 and Thorn start light and develop patina through wear. All three are 925 sterling silver without rhodium plating; finish is a separate choice from the alloy.

Are these signet rings only for men?

STRUGA does not divide jewellery by gender. Choose the form and the size for the hand: the product photographs show the relief, and the size guide explains how to measure the inner diameter.

Can I have a signet ring engraved?

Ask through Custom Order before buying. The position and design of the engraving depend on the chosen ring. Its upper relief should not be treated as a blank plate; the team confirms what can be engraved and the production time for the request.

How do I see a ring’s price and production time?

Select a size on the product page to see its current price. Standard making takes about two weeks. Delivery follows production; an individual request has a separately agreed schedule.

STRUGA

Signet Rings

Handmade 925 silver signet rings: BRUTALISM V.1, V.3 and Thorn. Compare light and blackened finishes, weights and sizes. Made to order in about two weeks.

About this section

Three silver signet rings: BRUTALISM V.1, BRUTALISM V.3 and Thorn.

Material: 925 sterling silver, without rhodium plating or stones.

Finish: light Living Silver on V.1 and Thorn; black oxidation on V.3.

Catalogue weight: 4.7–24 g, depending on the model and size.

Made to order in about two weeks, handcrafted on Bali. Shipping follows production.

STRUGA makes signet rings in 925 sterling silver with raised bars or a faceted asymmetric upper section. Choose BRUTALISM V.1 for a light surface and an even row of bars, V.3 for stepped bars and black oxidation, or Thorn for a lighter ring with a half-link silhouette. Each product page shows the sizes, weight and current price.

Which silver signet ring should I choose?

The two BRUTALISM rings share a wide band and a relief made from flat bars. V.1 arranges them in a dense row; V.3 breaks the row into steps. Thorn carries the sharp planes of the THORN family into an asymmetric half-link form. These three rings belong to the CODEX world.

Object	Finish	Weight, g
BRUTALISM V.3	Black oxidation	9.6–24
BRUTALISM V.1	Living Silver	9.6–24
Thorn	Living Silver	4.7–12.7

BRUTALISM sizes run from 15 to 22; Thorn starts at 16. The numbers are inner diameters in millimetres, not US ring sizes. At the same size 18, each BRUTALISM ring weighs 14 g and Thorn weighs 7 g. Comparing the same size shows the difference more clearly than comparing the lightest version of one model with the heaviest version of another.

Are all the signet rings dark?

V.3 is darkened at the bench. V.1 and Thorn begin as light, unplated silver and develop patina through wear. Living Silver names the changing surface of unplated silver; it does not mean that every ring arrives black. Compare the finish and relief in the photographs before choosing a model.

How do I buy a handmade signet ring?

Open the chosen ring, select the size and check its current price before adding it to the cart. The product page gives the price for the exact variant.

Use the ring size guide before ordering. A wide band and an asymmetric ring need to fit the finger on which they will be worn. If the measurement is uncertain, contact STRUGA before production rather than choosing a different size from a general rule.

Standard production takes about two weeks in the Bali workshop. International shipping is arranged from Bali. Delivery time is separate; the destination, delivery time and cost are confirmed during ordering. For a non-standard size or engraving, send a Custom Order request. The position of the engraving and its effect on the relief must be agreed for the chosen ring; an engraved flat upper plate is not a standard feature of all three designs.

Signet rings and other ring forms

In this collection, the upper part of the ring is built as a broad relief or a faceted volume. The word signet does not promise a smooth plate, a crest or a gemstone. For other silhouettes, compare FUSED and SIGNATURE ASYMMETRIC, or read the Atlas entry on statement rings.