Top.Mail.Ru
Skip to content
THORN RADIO

Men's Bracelet Sizes: S, M and Thick Links

A wrist measurement is the starting point for choosing between S and M. The bracelet's design tells you what to compare next: the space inside a chain when it is fastened, or the inside shape and opening of a rigid cuff. This guide works through STRUGA's listed sizes, the four-centimetre gap between some options and the extra questions that thick links raise.

STRUGA pieces for the international market are made in Bali.

Updated October 15, 2026

Take your wrist measurement before looking at the letters. Wrap a flexible tape or a narrow strip of paper around the place where you will wear the bracelet, touching the skin without pressing into it. Mark the overlap on the paper and measure the strip with a ruler. Write down the result without adding extra length. The general Bracelet Size Guide covers the full method and conversions between centimetres and inches; here, we will use that measurement to compare models such as Blade Medium Links V.2.

What do S and M mean on STRUGA bracelets?

In the catalogue checked on 29 September 2026, eight of STRUGA's 14 active bracelet models list S as 17 cm and M as 21 cm. Carabiner 2 Mini and One Display Techno use slightly different lengths: S is 17.5 cm and M is 21.5 cm. Blade Big Links starts at M, listed as 23 cm. Choosing a letter therefore begins with the particular model, as the table shows.

Keep your wrist measurement beside the model's listed length. Ask how that length was measured: from end to end with the bracelet open, or around its inside when fastened. Check whether the measurement includes the clasp. The distinction becomes easier to see with a concrete example.

Catalogue example Listed options, cm What to check
Blade Medium Links V.2 S 17; M 21 Clasp and usable space when closed
Carabiner 2 Mini / One Display Techno S 17.5; M 21.5 The model's own measurement convention
Carabiner 2 Big Cross XS 14.5; S 17.5; M 21.5 Selected variant, including the XS option
Blade Pins 21.5 One listed length does not mean universal fit
Blade Big Links M 23; L 26 Thick links and closed-loop space
Big Thorn 16; 17; 19; 21; 23 Internal width, depth and opening

What if my wrist falls between S and M?

For a wrist measuring 17.6 cm, subtracting the wrist measurement from the listed lengths gives −0.6 cm for 17 cm and +3.4 cm for 21 cm. The options are four centimetres apart, but these differences do not tell you how much room the fastened bracelet will leave. The listed length may have been measured along a different line from the bracelet’s inner circumference, and the clasp also affects how the ends meet.

A comfortable bracelet of similar construction gives you a useful comparison. Bring it when trying on the selected model, or send STRUGA photographs beside a ruler, including a close-up of the clasp. Include your wrist measurement and whether you want the new bracelet to stay close or move more freely. If neither S nor M looks suitable, a different model or a Custom Order enquiry gives you a way forward without rounding your wrist measurement to the nearest letter.

Why do thick links change the fit?

With thick links, the metal itself takes up part of the space inside the loop. That is why two bracelets with the same stated length can feel different on the wrist. Blade Big Links makes this question especially relevant: compare its own M and L options and the room inside when fastened. Weight alone will not tell you how much space is left.

A simple geometric example shows why the measuring line matters. Imagine a perfectly circular band with an even thickness, t, from its inside to its outside. The circumference halfway through the metal is longer than the inner circumference by π × t. At a thickness of 3 mm, the difference is about 9.4 mm; at 6 mm, about 18.8 mm. A chain's moving links, a clasp and an oval wrist do not follow that ideal circle. Use the example to understand the difference between measurements, then compare the actual bracelet rather than calculating a size from its thickness.

Why does Big Thorn need a different check?

Big Thorn needs a different set of measurements because it is rigid and open, with carbon inlays. Its listed options are 16, 17, 19, 21 and 23 cm. To judge the fit, ask for the inside width, the front-to-back dimension and the width of the opening for the selected option, along with an explanation of what its size number measures. A 19 cm label alone cannot answer whether it will suit an 18 or 18.5 cm wrist.

An open cuff goes onto the wrist through a gap; a closed bangle has to pass over the hand first. This is why a measurement around the knuckles serves a different purpose from a wrist measurement. If you already have a comfortable open cuff, record its two inside dimensions and its gap for comparison. Keep Big Thorn's shape as made: do not bend it to adjust the fit.

Is there a universal amount to add to the wrist?

Once these constructions are considered together, a fixed addition to the wrist measurement becomes less useful. Tiffany's guide distinguishes cuffs and bangles from chain and link bracelets, while James Avery's guide gives instructions for particular bracelet types. Each guide explains that brand's products. Use the instructions for the STRUGA model you are choosing rather than transferring another brand's M or its recommended allowance.

When trying it on, put the bracelet where you intend to wear it, bend your wrist, rest your hand on a desk and pull on a sleeve. Check for pressure, make sure the bracelet cannot slip off over your hand and try the clasp yourself. If you wear a watch beside it, try them together. These small movements tell you more about everyday comfort than the difference between two length labels.

What should I send when asking about size?

For online advice, the same fitting questions can be turned into a short set of notes. Send the exact model and variant, your wrist measurement with its unit, and how closely you want the bracelet to sit. The table below helps you add a useful comparison.

Information Why it helps
Exact product and selected variant Avoids applying another model's chart
Wrist circumference and unit Keeps centimetres and inches distinct
Similar bracelet that fits Provides a comparison in the same construction
How that bracelet was measured Distinguishes total length from internal space
Preferred movement and watch position Describes how you intend to wear it

For an open cuff, include its inside width, front-to-back dimension and gap. Photographs beside a ruler help show these measurements; a picture without a scale leaves their size unclear. If repeated wrist readings differ, record the range and when you measured. A change in temperature, or a study of hand volume, cannot be converted into a fixed extra length for a bracelet.

What does the average men's wrist tell us?

If you are choosing a gift, an average wrist measurement may seem a tempting shortcut. The ANSUR II methods and summary report gives a mean male wrist circumference of approximately 17.6 cm, with a standard deviation of about 0.9 cm, for 4,082 U.S. Army personnel. It describes that military sample, rather than a worldwide men's sizing standard.

For the person receiving the bracelet, their own measurement or a comparable bracelet they comfortably wear is more useful. Ask their permission to measure or compare it. If you cannot find out their size, discuss the available options before ordering. The study does not establish a comfortable allowance or tell us what proportion of men any STRUGA model will fit.

What mistakes make S/M comparisons unreliable?

When you compare those notes, keep the method beside each number. A wrist circumference, the length of a chain laid flat and the outside edge of a cuff describe different things. A catalogue photograph can help you choose a form, but it cannot supply the inside measurements needed for a fit comparison.

Choose for the way you will wear the bracelet now. A tight silver bracelet should not be bought in the expectation that it will stretch to fit: wear and deformation are different from sizing. A watch also needs a fitting alongside the bracelet, rather than an automatic move to a longer option.

What if the selected size is wrong?

If the chosen size does not work, contact STRUGA before modifying the bracelet or sending it back. Whether a chain can be shortened depends on its links and clasp; removing a link can change its construction or appearance. Keep an open rigid bracelet in its original shape rather than forcing the gap wider at home.

Check the policies on the storefront where you placed the order and agree on the next step for that order. If you are discussing a custom length, settle its dimensions, how they will be measured and the applicable terms before production. A Custom Order enquiry begins that discussion; the model's construction determines which lengths are possible.

Related guides and pieces

Keep the general size guide handy for measurement and unit conversion, then browse bracelets to compare the forms. The BLADE links lead into the CODEX world; THORN also connects to RITUAL. Once a design catches your attention, return to its own dimensions and the fit you want.

Objects from this guide

STRUGA

Frequently asked questions

Didn’t find the answer — write to us, we reply personally.

Ask a question →
01Is M the same length in every STRUGA bracelet?+–

No. Eight models list M as 21 cm, Carabiner 2 Mini and One Display Techno as 21.5 cm, and Blade Big Links as 23 cm. Check the selected model and variant.

02Which size should I choose for a 17–18 cm wrist?+–

The wrist measurement alone does not settle S versus M. Compare the model’s instructions, construction and a similar bracelet that fits. If neither option is suitable, discuss a different model or Custom Order.

03Does Big Thorn in 19 cm fit an 18 cm wrist?+–

The size label alone cannot establish that. Confirm the internal width, depth, opening and meaning of the label. Big Thorn is rigid and should not be bent to fit.

04Do thick links always need the next size up?+–

No automatic size step follows from thickness or weight. A chain and clasp are not an ideal circular band. Compare the closed bracelet and the model’s measurements.

05What is the average male wrist measurement?+–

ANSUR II reports approximately 17.6 cm for its sample of 4,082 U.S. Army men. This describes that sample, not all men and not a bracelet size. Measure the intended wearer.

06Is an 8-inch bracelet a standard men’s size?+–

Eight inches equals 20.32 cm. That conversion does not establish which wrist it fits: construction and measurement convention still matter. A one-length listing is a product option, not a universal standard.

07Can I order a length between S and M?+–

Ask about Custom Order for the specific model. Feasibility, dimensions, measurement method and terms need agreement before production. An enquiry does not guarantee any requested length.

08How can I measure without a tape?+–

Use a narrow paper strip and ruler, without compressing the skin. Record wrist circumference separately from bracelet length. The general Bracelet Size Guide explains the method and unit conversions.

Ask a question →